Windows Xp Sp3 Usb Bootable

• Make Windows Xp Sp3 Bootable Usb
• Windows Xp Sp3 Usb Bootable Download

Hello Billcould you describe your problem with Amd abit more, what type of problem do you have?Here is my favorite list of things to check. Bios settings compatible for Xp during installation.Some problems with older USB controlers. Disabling during install.Latest processor driver from AMD, and dual core optimizer.Dual core optimizer.

Recognized need for clock drifting. Helps with video playback, and different programs.Chipset drivers Latest signed ones from Intel if chipset from intel or Nvidia.How are you installing Xp WAIK? Nero burning image?

F6 with floppy?Unsigned drivers will not work with Sp3. Sp3 will not initialize theses drivers.If you are you using Sata Hardware.

And windows cannot locate the boot driver A little background Oem disks include earlier drivers. Sata is necessary no matter which manufactor you use.

Especially RAID. Be sure to have The latest signed drivers for your hardware. Available from your mb computer maker.What type of error are you receiving when? Evening wgbYes there are problems with Hps image. It has some sort of kb that conflicts with installing Sp3.

Appearently the image has some left overs from Inteppm. And will not boot. The bad Hp has not yet released a fix. But will soon.A few tips, set your bios when installing Sp3.1st booting with a 1 or 2 gig usb key drive installed on the usb port.2nd In the bios, Of course turning of unecessary ports.

At least the Sil Sata, Parrell, serial ports. TURNING off APm. When I use my asus mb it has to have S3 as the acpi mode.3. Turn off legacy usb ports.4. DO NOT use USB mice. Switch to PS2 adaptors, wired mice. To avoid problems5.

Disconnect any memory adaptors. Physically for the install.To install Sp3 the best resource is Jespers blog here.this helps you out.CheersKeith.

Make Windows Xp Sp3 Bootable Usb

For a review, and some possible solutions, of issues re XP SP3 and AMD processors/mobos, you might do worse than look at(Even yo you do not have an AMD chipset it might provide some pointers towards a solution.)Also, Microsoft have updated their own Help and Support article on this issue:' Error message after you upgrade a computer that uses a processor other than an Intel processor to Windows XP Service Pack 2 or to Windows XP Service Pack 3: 'STOP: 0x0000007E' 'Hope that this might be of some help. Best of luck.

How to Setup WindowsXP from USB drive?You are here: How to setup Windows XP from USB drive?Step1: Creating Rescue USB DriveFirst, we need create a rescue USB drive which can boot thecomputer. Please follow the steps,.Run PowerISO rescue media utility. You can download it.On Windows Vista or above operating system, you may need confirm the UACdialog to continue.Insert the USB drive you intend to boot from.The utility will allow you choose Windows PE architectureand version. It is suggested to select 32-bit architecture and Windows PE3.11. Click 'Next' to continue.Select USB drive for output device, and select the correctdrive from the list.

Click 'Next' to continue.The utility will start creating rescue USB drive. It willcheck necessary component and automatically download missing component fromthe server.Please notice that all existing data on the USB drive will bedestroyed during this step. The program will alert you before writing theUSB drive.

Click 'OK' to continue.When it's done, copy the Windows XP setup files to the USBdrive. Please note that you'll only need the i386 folder.If no errors occurred in the above process, you should now beall set to setup Windows XP from USB drive!Step 2: Configuring the BIOSYou should now reboot and go into the BIOS configuration toboot from USB. Instructions for doing so vary wildly from system to system, butgenerally entail the following:.Reboot the system.While booting (before Windows starts loading), get into theBIOS configuration screen by hitting something like F1, F2, Delete orEscape. Hotkey instructions are generally provided on the screen.Go to the section that contains your boot devices.With your USB drive plugged in, the USB drive should belisted. If it isn’t, your system might not support booting from USB.Assuming that it is supported (as is the case with virtually all modernhardware), promote your USB drive to the primary boot device.Exit from the BIOS configuration, saving all changes.Please notice that you can seriously screw up your system by providing incorrectBIOS settings!Step 3: Booting from rescue USB driveAssuming that you properly configured your BIOS and your USBdrive supports booting, your computer should now boot from the the rescueUSB drive. Depending on the speed ofyour USB drive, this may take a while.If it isn’t working, then double-check the following beforemaking a scene:.Is your BIOS properly configured for booting from the USBdevice?

(Is the USB device listed and does it have top priority?).Have you correctly prepared the USB drive in step one?(Restart the procedure.).Does your USB drive properly support being booted from? (Tryanother one!)Step 4: Prepping the Hard DiskYou need to make sure that your hard drive is partitioned andformatted properly. Especially if you've had Linux or some other operatingsystem on it, you'll need to repartition and format it. The rescue drive containfile manager and command line utility. You can launch DiskPart for diskpartitioning and formatting from the command utility.If you are sure that your hard drive is set up properly (i.e.

Ithas only run Windows, it contains a valid FAT or NTFS partition) then you cansafe yourself the hassle and skip this step.Window XP doesn't support GPT partition. If your hard drive ispartitioned in GPT mode, you also need repartition and format the disc.To repartition and format (This procedure will destroy any data on the harddrive):.Click the icon on task bar to launch a command line Window.Enter DiskPart to run the built-in disk management utility.Enter the commands needed to repartition and format your drive.

Forexample, try the following:select disk 0 (select the first disk. On your computer, disk0 may not be the correct disk, you can use 'list disk' to find thecorrect disk.)clean(purges the entire drive, essentially resetting it)create partitionprimary (creates a single partition from the entire disk)select partition1 (select the partition created)format fs=ntfs quick (format the partition to NTFS system,and do a quickly format)assign (assignthe partition a drive letter)exit (quits DiskPart).Step 5: Launching Windows XP Setup from USB driveWith your drive all ready, you can now launch the Windows XPsetup with a few custom parameters. Let's assume that the files are available atE:i386.Plugging in a device now won’t work. Remember that all USBdevices will need to be plugged in right from the start while using the rescuedrive.Run the following command:.Run E:i386winnt32.exe /syspart:C: /tempdrive:C: /makelocalsource.Replace C: with the drive you want to install Windows to.Proceed with the installation. If asked to convert theinstallation volume to NTFS, answer No. The setup program incorrectlybelieves that your USB drive (if is formatted as FAT) needs conversion.The setup program will then silently close, which might make youthink that something went wrong.

Windows Xp Sp3 Usb Bootable Download

Don't worry though.Step 6: Continue Windows XP Setup from Hard disk.Reboot your system.Unplug USB drive during post stage.Change your BIOS settings back to boot from hard disk againas needed.You can now continue to finish setting up Windows XP.Note: The above guide works with Windows XP only. For Windows10, Windows 7, Windows 8 / 8.1, or Windows Vista operating systems, please refer to another guide at.Copyright 2004-2019 Power Software Ltd. All rights reserved.